@ -27,7 +27,7 @@ Replaces embedded objects with references to them in the `objects` table. Only n
## Prune old remote posts from the database
This will prune remote posts older than 90 days (configurable with [`config :pleroma, :instance, remote_post_retention_days`](../../configuration/cheatsheet.md#instance)) from the database. Pruned posts may be refetched in some cases.
This will prune remote posts older than 90 days (configurable with [`config :pleroma, :instance, remote_post_retention_days`](../../configuration/cheatsheet.md#instance)) from the database, they will be refetched from source when accessed.
!!! danger
The disk space will only be reclaimed after `VACUUM FULL`. You may run out of disk space during the execution of the task or vacuuming if you don't have about 1/3rds of the database size free.
@ -45,9 +45,6 @@ This will prune remote posts older than 90 days (configurable with [`config :ple
```
### Options
- `--keep-threads` - don't prune posts when they are part of a thread where at least one post has seen local interaction (e.g. one of the posts is a local post, or is favourited by a local user, or has been repeated by a local user...)
- `--keep-non-public` - keep non-public posts like DM's and followers-only, even if they are remote
- `--vacuum` - run `VACUUM FULL` after the objects are pruned
This will download the latest build for the pre-configured `ref` and install it. It can then be configured as the one of the served frontends in the config file (see `primary` or `admin`).
You should **always check the [release notes/changelog](https://akkoma.dev/AkkomaGang/akkoma/src/branch/stable/CHANGELOG.md)** in case there are config deprecations, special update steps, etc.
You should **always check the [release notes/changelog](https://akkoma.dev/AkkomaGang/akkoma/src/branch/develop/CHANGELOG.md)** in case there are config deprecations, special update steps, etc.
Besides that, doing the following is generally enough:
## Switch to the akkoma user
@ -41,10 +41,8 @@ you _may_ need to specify `--flavour`, in the same way as
@ -62,7 +62,6 @@ To add configuration to your config file, you can copy it from the base config.
* `password_reset_token_validity`: The time after which reset tokens aren't accepted anymore, in seconds (default: one day).
* `local_bubble`: Array of domains representing instances closely related to yours. Used to populate the `bubble` timeline. e.g `["example.com"]`, (default: `[]`)
* `languages`: List of Language Codes used by the instance. This is used to try and set a default language from the frontend. It will try and find the first match between the languages set here and the user's browser languages. It will default to the first language in this setting if there is no match.. (default `["en"]`)
* `export_prometheus_metrics`: Enable prometheus metrics, served at `/api/v1/akkoma/metrics`, requiring the `admin:metrics` oauth scope.
## :database
* `improved_hashtag_timeline`: Setting to force toggle / force disable improved hashtags timeline. `:enabled` forces hashtags to be fetched from `hashtags` table for hashtags timeline. `:disabled` forces object-embedded hashtags to be used (slower). Keep it `:auto` for automatic behaviour (it is auto-set to `:enabled` [unless overridden] when HashtagsTableMigrator completes).
@ -1119,7 +1118,7 @@ Each job has these settings:
### Translation Settings
Settings to automatically translate statuses for end users. Currently supported
translation services are DeepL and LibreTranslate. The supported command line tool is [Argos Translate](https://github.com/argosopentech/argos-translate).
translation services are DeepL and LibreTranslate.
Translations are available at `/api/v1/statuses/:id/translations/:language`, where
`language` is the target language code (e.g `en`)
@ -1128,7 +1127,7 @@ Translations are available at `/api/v1/statuses/:id/translations/:language`, whe
- `:enabled` - enables translation
- `:module` - Sets module to be used
- Either `Pleroma.Akkoma.Translators.DeepL`,`Pleroma.Akkoma.Translators.LibreTranslate`, or `Pleroma.Akkoma.Translators.ArgosTranslate`
- Either `Pleroma.Akkoma.Translators.DeepL` or`Pleroma.Akkoma.Translators.LibreTranslate`
### `:deepl`
@ -1140,9 +1139,3 @@ Translations are available at `/api/v1/statuses/:id/translations/:language`, whe
- `:url` - URL of LibreTranslate instance
- `:api_key` - API key for LibreTranslate
### `:argos_translate`
- `:command_argos_translate` - command for `argos-translate`. Can be the command if it's in your PATH, or the full path to the file (default: `argos-translate`).
- `:command_argospm` - command for `argospm`. Can be the command if it's in your PATH, or the full path to the file (default: `argospm`).
- `:strip_html` - Strip html from the post before translating it (default: `true`).
@ -67,29 +67,3 @@ Priority of tags assigns in emoji.txt and custom.txt:
Priority for globs:
`special group setting in config.exs > default setting in config.exs`
## Stealing emoji
Managing your emoji can be hard work, and you just want to have the cool emoji your friends use? As usual, crime comes to the rescue!
You can use the `Pleroma.Web.ActivityPub.MRF.StealEmojiPolicy` [Message Rewrite Facility](../configuration/cheatsheet.md#mrf) to automatically add to your instance emoji that messages from specific servers contain. Note that this happens on message processing, so the emoji will be added only after your instance receives some interaction containing emoji _after_ configuring this.
To activate this you have to [configure](../configuration/cheatsheet.md#mrf_steal_emoji) it in your configuration file. For example if you wanted to steal any emoji that is not related to cinnamon and not larger than about 10K from `coolemoji.space` and `spiceenthusiasts.biz`, you would add the following:
```elixir
config :pleroma, :mrf,
policies: [
Pleroma.Web.ActivityPub.MRF.StealEmojiPolicy
]
config :pleroma, :mrf_steal_emoji,
hosts: [
"coolemoji.space",
"spiceenthusiasts.biz"
],
rejected_shortcodes: [
".*cinnamon.*"
],
size_limit: 10000
```
Note that this may not obey emoji licensing restrictions. It's extremely unlikely that anyone will care, but keep this in mind for when Nintendo starts their own instance.
**Note**: To execute a single command as the Akkoma system user, use `doas -u akkoma command`. You can also switch to a shell by using `doas -su akkoma`. If you don’t have and want `doas` on your system, you can use `su` as root user (UID 0) for a single command by using `su -l akkoma -s $SHELL -c 'command'` and `su -l akkoma -s $SHELL` for starting a shell.
* Git clone the AkkomaBE repository from stable-branch and make the Akkoma user the owner of the directory:
* Git clone the AkkomaBE repository and make the Akkoma user the owner of the directory:
```shell
doas mkdir -p /opt/akkoma
doas chown -R akkoma:akkoma /opt/akkoma
doas -u akkoma git clone https://akkoma.dev/AkkomaGang/akkoma.git -b stable /opt/akkoma
doas -u akkoma git clone https://akkoma.dev/AkkomaGang/akkoma.git /opt/akkoma
```
* Change to the new directory:
@ -109,7 +109,7 @@ doas -u akkoma mix deps.get
* This may take some time, because parts of akkoma get compiled first.
* After that it will ask you a few questions about your instance and generates a configuration file in `config/generated_config.exs`.
* Check the configuration and if all looks right, rename it, so Akkoma will load it (`prod.secret.exs` for productive instances):
* Check the configuration and if all looks right, rename it, so Akkoma will load it (`prod.secret.exs` for productive instance, `dev.secret.exs` for development instances):
```shell
doas -u akkoma mv config/{generated_config.exs,prod.secret.exs}
**Note**: To execute a single command as the Akkoma system user, use `sudo -Hu akkoma command`. You can also switch to a shell by using `sudo -Hu akkoma $SHELL`. If you don’t have and want `sudo` on your system, you can use `su` as root user (UID 0) for a single command by using `su -l akkoma -s $SHELL -c 'command'` and `su -l akkoma -s $SHELL` for starting a shell.
* Git clone the AkkomaBE repository from stable-branch and make the Akkoma user the owner of the directory:
* Git clone the AkkomaBE repository and make the Akkoma user the owner of the directory:
* This may take some time, because parts of akkoma get compiled first.
* After that it will ask you a few questions about your instance and generates a configuration file in `config/generated_config.exs`.
* Check the configuration and if all looks right, rename it, so Akkoma will load it (`prod.secret.exs` for productive instances):
* Check the configuration and if all looks right, rename it, so Akkoma will load it (`prod.secret.exs` for productive instance, `dev.secret.exs` for development instances):
**Note**: To execute a single command as the Akkoma system user, use `sudo -Hu akkoma command`. You can also switch to a shell by using `sudo -Hu akkoma $SHELL`. If you don’t have and want `sudo` on your system, you can use `su` as root user (UID 0) for a single command by using `su -l akkoma -s $SHELL -c 'command'` and `su -l akkoma -s $SHELL` for starting a shell.
* Git clone the AkkomaBE repository from stable-branch and make the Akkoma user the owner of the directory:
* Git clone the AkkomaBE repository and make the Akkoma user the owner of the directory:
* This may take some time, because parts of akkoma get compiled first.
* After that it will ask you a few questions about your instance and generates a configuration file in `config/generated_config.exs`.
* Check the configuration and if all looks right, rename it, so Akkoma will load it (`prod.secret.exs` for productive instances):
* Check the configuration and if all looks right, rename it, so Akkoma will load it (`prod.secret.exs` for productive instance, `dev.secret.exs` for development instances):
**Note**: To execute a single command as the Akkoma system user, use `sudo -Hu akkoma command`. You can also switch to a shell by using `sudo -Hu akkoma $SHELL`. If you don’t have and want `sudo` on your system, you can use `su` as root user (UID 0) for a single command by using `su -l akkoma -s $SHELL -c 'command'` and `su -l akkoma -s $SHELL` for starting a shell.
* Git clone the AkkomaBE repository from stable-branch and make the Akkoma user the owner of the directory:
* Git clone the AkkomaBE repository and make the Akkoma user the owner of the directory:
* This may take some time, because parts of akkoma get compiled first.
* After that it will ask you a few questions about your instance and generates a configuration file in `config/generated_config.exs`.
* Check the configuration and if all looks right, rename it, so Akkoma will load it (`prod.secret.exs` for productive instances):
* Check the configuration and if all looks right, rename it, so Akkoma will load it (`prod.secret.exs` for productive instance, `dev.secret.exs` for development instances):
This guide describes the installation and configuration of akkoma (and the required software to run it) on a single OpenBSD 7.2 server.
This guide describes the installation and configuration of akkoma (and the required software to run it) on a single OpenBSD 6.6 server.
For any additional information regarding commands and configuration files mentioned here, check the man pages [online](https://man.openbsd.org/) or directly on your server with the man command.
@ -12,10 +12,11 @@ For any additional information regarding commands and configuration files mentio
To install them, run the following command (with doas or as root):
(Note that the erlang version may change, it was 25 at the time of writing)
Akkoma requires a reverse proxy, OpenBSD has relayd in base (and is used in this guide) and packages/ports are available for nginx (www/nginx) and apache (www/apache-httpd). Independently of the reverse proxy, [acme-client(1)](https://man.openbsd.org/acme-client) can be used to get a certificate from Let's Encrypt.
#### Optional software
@ -28,35 +29,32 @@ Per [`docs/installation/optional/media_graphics_packages.md`](../installation/op
To install the above:
```
pkg_add ffmpeg p5-Image-ExifTool
pkg_add ImageMagick ffmpeg p5-Image-ExifTool
```
#### Creating the akkoma user
Akkoma will be run by a dedicated user, `_akkoma`. Before creating it, insert the following lines in `/etc/login.conf`:
Akkoma will be run by a dedicated user, \_akkoma. Before creating it, insert the following lines in login.conf:
```
akkoma:\
:datasize-max=1536M:\
:datasize-cur=1536M:\
:openfiles-max=4096
```
This creates a `akkoma` login class and sets higher values than default for datasize and openfiles (see [login.conf(5)](https://man.openbsd.org/login.conf)), this is required to avoid having akkoma crash some time after starting.
This creates a "akkoma" login class and sets higher values than default for datasize and openfiles (see [login.conf(5)](https://man.openbsd.org/login.conf)), this is required to avoid having akkoma crash some time after starting.
Create the `_akkoma` user, assign it the akkoma login class and create its home directory (`/home/_akkoma/`): `useradd -m -L akkoma _akkoma`
Create the \_akkoma user, assign it the akkoma login class and create its home directory (/home/\_akkoma/): `useradd -m -L akkoma _akkoma`
#### Clone akkoma's directory
Enter a shell as the `_akkoma` user. As root, run `su _akkoma -;cd`. Then clone the repository with `git clone https://akkoma.dev/AkkomaGang/akkoma.git`. Akkoma is now installed in `/home/_akkoma/akkoma/`, it will be configured and started at the end of this guide.
Enter a shell as the \_akkoma user. As root, run `su _akkoma -;cd`. Then clone the repository with `git clone https://akkoma.dev/AkkomaGang/akkoma.git`. Akkoma is now installed in /home/\_akkoma/akkoma/, it will be configured and started at the end of this guide.
#### PostgreSQL
Create `_postgresql`'s user directory (it hasn't been created yet): `mdir var/postgresql/data`. To set it as home
directory for user `_postgresql` run `usermod -d /var/postgresql/data _postgresql`.
Start a shell as the `_postgresql` user (as root run `su _postgresql -` then run the `initdb` command to initialize postgresql.
You will need to specify pgdata directory to the default (`/var/postgresql/data`) with the `-D <path>` and set the user to postgres with the `-U <username>` flag. This can be done as follows:
Start a shell as the \_postgresql user (as root run `su _postgresql -` then run the `initdb` command to initialize postgresql:
You will need to specify pgdata directory to the default (/var/postgresql/data) with the `-D <path>` and set the user to postgres with the `-U <username>` flag. This can be done as follows:
```
initdb -D /var/postgresql/data -U postgres
```
If you are not using the default directory, you will have to update the `datadir` variable in the `/etc/rc.d/postgresql` script.
If you are not using the default directory, you will have to update the `datadir` variable in the /etc/rc.d/postgresql script.
When this is done, enable postgresql so that it starts on boot and start it. As root, run:
```
@ -72,7 +70,7 @@ httpd will have three fuctions:
* serve a robots.txt file
* get Let's Encrypt certificates, with acme-client
Do not forget to change *<IPv4/6 address\>* to your server's address(es). If httpd should only listen on one protocol family, comment one of the two first *listen* options.
Create the `/var/www/htdocs/local/` folder and write the content of your robots.txt in `/var/www/htdocs/local/robots.txt`.
Create the /var/www/htdocs/local/ folder and write the content of your robots.txt in /var/www/htdocs/local/robots.txt.
Check the configuration with `httpd -n`, if it is OK enable and start httpd (as root):
```
rcctl enable httpd
@ -107,7 +108,7 @@ rcctl start httpd
#### acme-client
acme-client is used to get SSL/TLS certificates from Let's Encrypt.
Insert the following configuration in `/etc/acme-client.conf`:
Insert the following configuration in /etc/acme-client.conf:
Replace *<domain name\>* by the domain name you'll use for your instance. As root, run `acme-client -n` to check the config, then `acme-client -ADv <domain name>` to create account and domain keys, and request a certificate for the first time.
Make acme-client run everyday by adding it in `/etc/daily.local`. As root, run the following command: `echo "acme-client <domain name>" >> /etc/daily.local`.
Make acme-client run everyday by adding it in /etc/daily.local. As root, run the following command: `echo "acme-client <domain name>" >> /etc/daily.local`.
Relayd will look for certificates and keys based on the address it listens on (see next part), the easiest way to make them available to relayd is to create a link, as root run:
```
@ -139,7 +140,7 @@ This will have to be done for each IPv4 and IPv6 address relayd listens on.
#### relayd
relayd will be used as the reverse proxy sitting in front of akkoma.
Insert the following configuration in `/etc/relayd.conf`:
Insert the following configuration in /etc/relayd.conf:
Enabling and configuring pf is highly recommended.
In `/etc/pf.conf`, insert the following configuration:
In /etc/pf.conf, insert the following configuration:
```
# Macros
if="<networkinterface>"
@ -221,30 +222,31 @@ pass in quick on $if inet6 proto icmp6 to ($if) icmp6-type { echoreq unreach par
pass in quick on $if proto tcp to ($if) port { http https } # relayd/httpd
pass in quick on $if proto tcp from $authorized_ssh_clients to ($if) port ssh
```
Replace *<network interface\>* by your server's network interface name (which you can get with ifconfig). Consider replacing the content of the `authorized_ssh_clients` macro by, for example, your home IP address, to avoid SSH connection attempts from bots.
Replace *<network interface\>* by your server's network interface name (which you can get with ifconfig). Consider replacing the content of the authorized\_ssh\_clients macro by, for exemple, your home IP address, to avoid SSH connection attempts from bots.
Check pf's configuration by running `pfctl -nf /etc/pf.conf`, load it with `pfctl -f /etc/pf.conf` and enable pf at boot with `rcctl enable pf`.
#### Configure and start akkoma
Enter a shell as `_akkoma` (as root `su _akkoma -`) and enter akkoma's installation directory (`cd ~/akkoma/`).
Enter a shell as \_akkoma (as root `su _akkoma -`) and enter akkoma's installation directory (`cd ~/akkoma/`).
Then follow the main installation guide:
* run `mix deps.get`
* run `MIX_ENV=prod mix pleroma.instance gen` and enter your instance's information when asked
* copy `config/generated_config.exs` to `config/prod.secret.exs`. The default values should be sufficient but you should edit it and check that everything seems OK.
* copy config/generated\_config.exs to config/prod.secret.exs. The default values should be sufficient but you should edit it and check that everything seems OK.
* exit your current shell back to a root one and run `psql -U postgres -f /home/_akkoma/akkoma/config/setup_db.psql` to setup the database.
* return to a `_akkoma` shell into akkoma's installation directory (`su _akkoma -;cd ~/akkoma`) and run `MIX_ENV=prod mix ecto.migrate`
* return to a \_akkoma shell into akkoma's installation directory (`su _akkoma -;cd ~/akkoma`) and run `MIX_ENV=prod mix ecto.migrate`
As `_akkoma` in `/home/_akkoma/akkoma`, you can now run `LC_ALL=en_US.UTF-8 MIX_ENV=prod mix phx.server` to start your instance.
As \_akkoma in /home/\_akkoma/akkoma, you can now run `LC_ALL=en_US.UTF-8 MIX_ENV=prod mix phx.server` to start your instance.
In another SSH session/tmux window, check that it is working properly by running `ftp -MVo - http://127.0.0.1:4000/api/v1/instance`, you should get json output. Double-check that *uri*'s value is your instance's domain name.
##### Starting akkoma at boot
An rc script to automatically start akkoma at boot hasn't been written yet, it can be run in a tmux session (tmux is in base).
#### Create administrative user
If your instance is up and running, you can create your first user with administrative rights with the following command as the `_akkoma` user.
If your instance is up and running, you can create your first user with administrative rights with the following command as the \_akkoma user.
```
LC_ALL=en_US.UTF-8 MIX_ENV=prod mix pleroma.user new <username><your@emailaddress> --admin
This guide covers a installation using an OTP release. To install Akkoma from source, please check out the corresponding guide for your distro.
## Pre-requisites
* A machine running Linux with GNU (e.g. Debian, Ubuntu) or musl (e.g. Alpine) libc and an `x86_64` CPU you have root access to. If you are not sure if it's compatible see [Detecting flavour section](#detecting-flavour) below
* A machine running Linux with GNU (e.g. Debian, Ubuntu) or musl (e.g. Alpine) libc and `x86_64`, `aarch64` or `armv7l`CPU, you have root access to. If you are not sure if it's compatible see [Detecting flavour section](#detecting-flavour) below
* For installing OTP releases on RedHat-based distros like Fedora and Centos Stream, please follow [this guide](./otp_redhat_en.md) instead.
* A (sub)domain pointed to the machine
@ -118,8 +118,8 @@ Restart PostgreSQL to apply configuration changes:
<p><%= raw Gettext.dpgettext("static_pages", "oauth authorize message", "Application <strong>%{client_name}</strong> is requesting access to your account.", client_name: safe_to_string(html_escape(@app.client_name))) %></p>
</div>
<p><%= raw Gettext.dpgettext("static_pages", "oauth authorize message", "Application <strong>%{client_name}</strong> is requesting access to your account.", client_name: safe_to_string(html_escape(@app.client_name))) %></p>
<%= if @params["registration"] in ["true", true] do %>
<h3><%= Gettext.dpgettext("static_pages", "oauth register page title", "This is the first time you visit! Please enter your Pleroma handle.") %></h3>
<p><%= Gettext.dpgettext("static_pages", "oauth register nickname unchangeable warning", "Choose carefully! You won't be able to change this later. You will be able to change your display name, though.") %></p>
<%= if @params["registration"] in ["true", true] do %>
<h3><%= Gettext.dpgettext("static_pages", "oauth register page title", "This is your first visit! Please enter your Akkoma handle.") %></h3>
<p><%= Gettext.dpgettext("static_pages", "oauth register nickname unchangeable warning", "Choose carefully! You won't be able to change this later. You will be able to change your display name, though.") %></p>